Triple xxx TxRC-SC-CH-0100 Sprint Car Bolt Kit Complete Grade 8 Kit

Includes everything you need to put together your Triple X Sprint Car. Packaged separately so you know exactly where they go and complete with a list of all of its contents. Each package is marked with its location and extra nuts and washers are provided. All Bolts are Grade 8 with Nylock Thin Nuts and AN Washers.

Complete with Torque Tube Studs, Jacobs Ladder Pins with Springs and Clips, Perfect length Tail Tank Bolts, Lower Motorplate Bolts, Bell Crank, Pedals, Wings, Steering, Brakes, Front End, Engine Mounting to Chassis, Shocks, Radius Rods and More!

Bolts
Brake Pedal to Car (1) 3/8-24 x 2"
Front Motor Mount to Chassis (2) 3/8-24 x 1"
Rear Wing Tee to Wing (2) 3/8-24 x 1 3/4"
Rear Wing Tee to Chassis (2) 3/8-24 x 1 3/4"
Power Steering Bracket to Motorplate (2) 3/8-16 x 1" SCS
Steering Clamp on Chassis (2) 3/8-24 x 1"
Left Front Brake Caliper to Front End (2) 3/8-24 x 1"
Upper Motorplate to Block (2) 3/8-16 x 1 1/2"
Watts Link Straps to Watts Link (2) 3/8-24 x 2"
Rear Motor Plate to Block (4) 3/8-16 x 1 1/4" SCS
Motorplate to Chassis (4) 3/8-24 x 2 1/2"
Torque Ball Housing to Motorplate (6) 3/8-16 x 1" SCS
Throttle Pedal to Throttle Rod (1) 10/32 x 5/8" SCS
Motorplate to Floorpan (4) 10/32 x 3/4" SCS
Nerfs, Bumpers and Torque Tube (16) 10/32 x 1 1/2" SSCS
Pitman Arm to Drag Link (1) 1/2-20 x 2"
Tie Rod to Steering Arm R (1) 1/2-20 x 2"
Tie Rod to Steering Arm L (1) 1/2-20 x 1 3/4"
Drag Link to Steering Arm (1) 1/2-20 x 2"
Upper Rear Shock to Chassis (2) 1/2-20 x 2 3/4"
Upper Front Shock to Chassis (2) 1/2-20 x 3 1/2"
Lower Front Shock to Axle (2) 1/2-20 x 1 1/2"
Lower Rear Shock (2) 1/2-20 x 2 1/2"
RF Steering Arm to Spindle (2) 1/2-20 x 1 3/4"
Radius Rod to Axle (3) 1/2-20 x 1 1/4"
Radius Rod to Chassis (6) 1/2-20 x 2 3/4"
Wing Cylinder to Chassis (1) 1/4-28 x 1"
Upper Steering Bracket to Chassis (2) 1/4-28 x 1 3/4"
Bell Crank to Chassis (1) 1/4-28 x 1 3/4"
Wing Valve to Chassis (2) 1/4-20 x 3/8"
Front Posts to Front Wing (4) 1/4-28 x 1"
Wing Cylinder to Wing Tee (1) 5/16-24 x 1"
Master Cylinder to Pedal (1) 5/16-24 x 2 1/4"
Throttle Pedal to Chassis (1) 5/16-24 Nut
Rear Front Wing (2) 5/16-24 x 1 1/4"
1/2 Box Steering Bracket to Chassis (2) 5/16-24 x 1
Master Cylinder to Chassis (2) 5/16-24 x 2 1/2"
Pinch Clamps (4) 5/16-24 x 1 1/2"
Tank to Chassis (4) 5/16-18 x 7/8" SCS
Watts Link to Birdcage (1) Pin (1/2 x 1 1/2") and Clip
Torque Tube Stud Kit
(Studs, Nuts, Washers) (1) 6 Studs, Washers and Nuts
Rear Arm Spacers (2) 1/2" ID x 3/4" OD Cone
Watts Link to Chassis (2) Pin (3/8 x 4"), Clip and Spring
Rear Caliper to Rear End (2) 7/16 x 14 x 1 1/2"
Nuts
10/32 Nylock 1/2 Nuts (5) 10/32"
1/4" Nylock 1/2 Nuts (10) 1/4"
5/16" Nylock 1/2 Nuts (12) 5/16"
3/8" Nylock 1/2 Nuts (12) 3/8"
1/2" Nylock 1/2 Nuts (22) 1/2"
Washers
1/4" AN Washers (5) 1/4"
5/16" AN Washers (15) 5/16"
3/8" AN Washers (35) 3/8"
7/16" AN Washers (2) 7/16"
1/2" AN Washers (10) 1/2"