EFI IN TANK / EXT BRUSHLESS

Aeroflow Performance would like to introduce the new brushless AF49- 1214 fuel pump. For classic performance with more heart we used the original design of the very popular AF49-1014. So this features all the same dimensions, electrical connections and internal threads so it’s a very easy and convenient direct swap over.This brushless fuel pump does NOT require any external fuel pump controller. Just a simple positive and negaitive connection. The motor use sensors to monitor the angle of the rotor for faster and more reliable phase shifting allowing for more torque capacity and efficiency. The armature in a brushless motor is stationary. Instead, the magnets rotate around the armature and the motor controller manages the phase shift to keep the motor in motion providing more torque per watt, higher torque to weight ratio, lower noise and higher reliability. This provides precise control of fuel pressure under tight tolerances resulting in less current draw, less heat, less noise and extended life. While producing 360LPH (95GPH) of fuel flow and operating at 100PSI (6.89BAR).With this fuel pump, you will be able to support 900 horsepower. It features a check valve already screwed into the outlet, if you leave it in you need to run a banjo fitting off it as it has a tapered thread. It is quite common for people to remove the check valve and screw an adaptor straight into the outlet. If you do this, you will need to put an aftermarket check valve inline to keep fuel pressure in your fuel lines.