Brand New 350 Cid Chev 290Hp Crate Engine
Product Information
Quite simply, the 290 HP 350-cubic-inch is the best small-block crate engine value offered by GM!
With 290 horsepower and 326 lb.-ft. of torque, it makes a great replacement engine for countless GM vehicles, while its all-new construction provides peace of mind over salvage and rebuilt engines. The 290 HP is packed with good stuff, too, starting with the four-bolt-main block, aluminum pistons, and a hydraulic camshaft. The durable iron cylinder heads process healthy amounts of air to deliver strong torque across the rpm range and great mid-range horsepower. Delivered as a long block assembly, you add items like an intake manifold, carburetor, ignition system, starter, balancer and water pump—all available from our ebay store!
Build it up to suit your needs, as the economical 290 HP will leave plenty of change on the table!
- The GM 290 horsepower V8 will provide great durability because of its 4-bolt mains, PM steel rods, strong cast aluminum pistons.
- The camshaft has .450" intake and .460" exhaust lift with hydraulic flat tappets.
- The cast iron cylinder heads have 1.94" intake and 1.50" exhaust valves wit 76 cc combustion chamber. These heads have the conventional 90 degree with 12 bolt intake manifold attaching design used from 1955 thru late 1980 12 bolt postion @ 90° to the intake/headflange.
This engine was designed to work with the following components:
- intake manifold 10185063.
- HEI distributor 93440806.
- balancer 12551537.
- flex plate 471529.
Bolt on the starter,water pump, fuel pump, and your ready to run.
This 350 engine is not intended for marine use, and should be used in 1979 and earlier pre-emissions street vehicles or any off road usage.
- Engine Assembly Style Long block
- Assembled Yes
- Engine Balance Internal
- Intake Manifold Included No
- Cylinder Heads Included Yes
- Carburetor Included No
- Distributor Included No
- Oil Pan Included Yes
- Valve Covers Included Yes
- Timing Cover Included Yes
- Water Pump Included No
- Harmonic Balancer Included No
- Flexplate Included No
- Flywheel Included No
- Air Cleaner Included No
- Spark Plugs Included No
- Spark Plug Wires Included No
- Computer Included No
- Wiring Harness Included No
- Rear Main Seal Style 2-piece
Product Information
Quite simply, the 290 HP 350-cubic-inch is the best small-block crate engine value offered by GM!
With 290 horsepower and 326 lb.-ft. of torque, it makes a great replacement engine for countless GM vehicles, while its all-new construction provides peace of mind over salvage and rebuilt engines. The 290 HP is packed with good stuff, too, starting with the four-bolt-main block, aluminum pistons, and a hydraulic camshaft. The durable iron cylinder heads process healthy amounts of air to deliver strong torque across the rpm range and great mid-range horsepower. Delivered as a long block assembly, you add items like an intake manifold, carburetor, ignition system, starter, balancer and water pump—all available from our ebay store!
Build it up to suit your needs, as the economical 290 HP will leave plenty of change on the table!
- The GM 290 horsepower V8 will provide great durability because of its 4-bolt mains, PM steel rods, strong cast aluminum pistons.
- The camshaft has .450" intake and .460" exhaust lift with hydraulic flat tappets.
- The cast iron cylinder heads have 1.94" intake and 1.50" exhaust valves wit 76 cc combustion chamber. These heads have the conventional 90 degree with 12 bolt intake manifold attaching design used from 1955 thru late 1980 12 bolt postion @ 90° to the intake/headflange.
This engine was designed to work with the following components:
- intake manifold 10185063.
- HEI distributor 93440806.
- balancer 12551537.
- flex plate 471529.
Bolt on the starter,water pump, fuel pump, and your ready to run.
This 350 engine is not intended for marine use, and should be used in 1979 and earlier pre-emissions street vehicles or any off road usage.
- Engine Assembly Style Long block
- Assembled Yes
- Engine Balance Internal
- Intake Manifold Included No
- Cylinder Heads Included Yes
- Carburetor Included No
- Distributor Included No
- Oil Pan Included Yes
- Valve Covers Included Yes
- Timing Cover Included Yes
- Water Pump Included No
- Harmonic Balancer Included No
- Flexplate Included No
- Flywheel Included No
- Air Cleaner Included No
- Spark Plugs Included No
- Spark Plug Wires Included No
- Computer Included No
- Wiring Harness Included No
- Rear Main Seal Style 2-piece