Skip to product information
1 of 1

Yella Terra

Yella Terra YT6685 Chevrolet V8 Ls3/Ls9/Lsa/L98 Ultralite 8.0mm Rockers, Ratio 1.85:1

Yella Terra YT6685 Chevrolet V8 Ls3/Ls9/Lsa/L98 Ultralite 8.0mm Rockers, Ratio 1.85:1

YT6685
Regular price $1,098.70 AUD
Regular price Sale price $1,098.70 AUD
Sale Sold out
Tax included. Shipping calculated at checkout.
 More payment options

Pickup available at 32 Fallon Street

Usually ready in 24 hours

*GMH OEM ROCKER ARM FAILURES*

Motoring (2017) reported “Holden will repair the 6.2-litre LS3 engine in the final 2000 or so V8 Commodores built this year following reports of engine noise and even failure in cars with as little as 50km on the clock”. 

The problem has been traced to a faulty batch of inlet rocker arms causing rough idle or misfiring of the engine. Rocker arms have fractured at the nose in some instances; wreaking havoc on the valve and cylinder.

Take the bull by the horns and upgrade from your already wear inducing solid/non-roller tip OEM rockers.

Our 8mm Ultralite design can be fitted in ~1 hour and at a fraction of the cost of major rebuilds associated with faulty OEM rocker arm failure. No machining required, fits under standard rocker covers.

Steer clear of cheap “fix” trunnion upgrades, which fail to address the shortcomings of OEM rocker arms. 

fit Yella Terra with confidence - Track Tested. Street Proven.

Ultralite

Yella Terra’s exclusive Ultralite rocker arm, shaft and pedestal system offers 50% less nose weight than the factory rocker system, the result being greater RPM potential without compromising strength or durability. The perfect low-maintenance substitute for factory rocker arms which utilise problematic cage-less bearings, solid non-roller tips and heavy steel bodies.

Yella Terra Ultralite is ideal for high revving street applications when coupled with factory/lightweight aftermarket springs. Manufactured and assembled in Australia using the highest quality materials and componentry consistent with those found in our Platinum race series.

Our wide range of true ratios allows you to achieve high lift without relying solely on your camshaft… a trend many engine builders and racers alike are adopting to relieve the inertia on lifters and pushrods generated by aggressive and often violent ramp rates required to make big lift.

Don't fall victim to bearing/trunnion upgrades which only address half the shortcomings of OEM rockers.

Includes YT 5132 10mm valve cover spacer

Why Choose Ultralite?

  • Built to withstand 400lbs* max open spring pressure
  • Oversize full-complement caged bearings designed for oscillating (rocking) loads, paired with oversize precision ground trunnions to reduce friction.
  • Intricately balanced lightweight arms ensuring vital valvetrain stability - focusing attention on the harmony of the entire engine. 50% less oscillating nose weight eliminates valve float in upper RPM range allowing for higher rev ceiling.
  • Extruded from aircraft grade aluminium, perfect for dissipating excess top-end heat.
  • Proven bolt-on shaft mount design that mounts both inlet/exhaust to common shaft, effectively increasing footprint and clamp load twofold without any further cylinder head modification.
  • Various ratios available, catering for every camshaft grind. High ratios allow for additional lift on stock and aftermarket camshafts.
  • Chrome moly steel hardened and ground roller tips of generous diameter (positively retained by internal circlip) preventing abrasion of valve tips and guides commonly seen with non-roller tip rockers. Allows for smoother, quieter operation. Maintains lash and reduces necessary and tedious engine maintenance.

Tech Spec

PART NO YT 6685
BRAND ULTRALITE
APPLICATION FACTORY REPLACEMENT/STREET
MAX OPEN SPRING PRESSURE
400lbs
MAKE CHEVROLET 
ENGINE LS3/LS9/LSA/L98
MOUNTING STYLE SHAFT MOUNT
ROCKER ARM RATIO 1.85
STUD SIZE 8mm
ADJUSTABLE/HYDRAULIC HYDRAULIC
ROCKER ARM STYLE FULL ROLLER
ROCKER MATERIAL ALUMINIUM
ROCKER ARM BODY STYLE STANDARD
ROCKER ARM NUT STYLE CAPSCREW
MAX SPRING DIAMETER 1.437"
INLET OFFSET YES
QTY SET OF 16
NOTE EASY FIT

 Includes YT 5132 10mm valve cover spacer



Manufacturer Part Number:

View full details
  • Quality Brands

    We only sell quality genuine products - with brand names you can trust, you know that you are getting the best products for your build complete with limited manufacturers warranty

  • Fast & Efficent

    We use a number of great couriers to get your parcel to you ASAP! In a rush? Give us a call and ask about an 'expedited order' or enquire on current ETAs!

  • Zero Regret - Hassle Free Returns

    We accept returns for up to 30 days, our returns are hassle free when following our return guidelines and policies and most items can even come back on our capped price Australia Post returns, making it a cost effective process to send your item back if it's not quite right.

  • Experienced Team

    Our team are all passionate about the Automotive Industry and involved with lots of avenues of Motorsports. We have mechanics, engine builders and die-hard enthusiasts here to answer your questions or give you expert advice for your ride - just give us a call!

NaN of -Infinity

Found a better deal elsewhere?

We try to keep our pricing competitive for all our customers - if you have found a better deal elsewhere, send us an email here and we will do our best to match offers.
(Ensure you include the part number and a link to the competitors price!)